`Your Nokia cell phone can be programmed to pick up radar speed traps, when
programmed your cell phone picks up the radar and alerts you on the message
alert tone.
1. Enter your menu
2. Select settings
3. Select security settings
4. Select closed user group
5. Select on
6. Enter 00000
7. Press ok
8. Clear back to normal, within a few seconds your phone will display a radar
sign with five zero's next to it. It is now activated.
Unfortunately only Nokia phones have this function. Cell info display needs to
be de-activated. Settings -> Phone Settings -> Cell Info display
Each time you turn off your phone, or even each time you loose contact with your
carrier, you´ll have to activate it again... It is done by steps 1 through 5,
but the number (00000) will be already on the field as default. If you put the
number 500 in the closed user group, and you go out of a store with detection
ports thy will go off.
Firmware version:
*#0000#
*#51x0# or
*#9999#
View Serial No., Date Made, Programming Date, Repaired:
*#92772689#
Thanks to Ben-Dov for this code
IMEI (International Mobile Equipment Identity) Code:
*#06#
Enhanced Full Rate (EFR):
*3370# to activate EFR. Makes calls sound better, but decreases battery life by
about 5%.
#3370# to deactivate EFR
Half Rate Mode (HFR):
*4720# to activate HFR. Decreases call quality but increases battery life by
about 30%.
#4270# to deactivate HFR.
Default Security Code:
12345
Warranty Code:
*#92702689# [*#war0anty#] asks warranty code. You can then type a number of
codes (Thanks to Mike Pfaff for these codes):
6232 - Display date of manufacture
7332 - Display date of last repair
7832 - Display purchasing date
9268 - Display serial number
37832 - Set purchasing date to MMYY
87267 - Confirm Transfer, Related to firmware upgrades
#746025625# says SIM CLOCK STOP ALLOWED or similar, depending on your SIM card.
Newer SIMs have a feature called 'clock stopping' that allows the phone to save
energy -- it is a kind of sleep mode for SIM cards. Not all versions of software
support this. You cannot turn the SIM clock on and off, the phone will do it
automatically if the SIM supports clock stopping.
NOKIA CODES & TRICKS:
To check the IMEI (International Mobile Equipment Identity) Type-
*#06#
Information you get from the IMEI-
XXXXXX XX XXXXXX X
TAC FAC SNR SP
• TAC = Type approval code
• FAC = Final assembly code
• SNR = Serial number
• SP = Spare
To check the phones Software revision type-
*#0000#
Information you get from the Software revision-
V 05.31
18-02-99
NSE-3
To enter the service menu type-
*#92702689# (*#WAR0ANTY#)
• Serial number (IMEI)
• Production date (MM/YY)
• Purchase date (MM/YY) You can only enter the date once.
• Date of last repair (0000=No repair)
• Transfer user data to another Nokia phone via Infra-Red
Clock Stopping
To check weather your SIM Card supports clock stopping type-
*#746025625# (*#SIM0CLOCK#)
Revealing the Headphone and Car-Kit menus
Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.
1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.
2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.
EFR CALL QUALITY
To activate EFR (Enhanced Full Rate) Enter the code-
*3370#
This improves call quality but decreases batterylife by about 5%
To deactivate it, Enter the code-
#3370#
More to come…
About
14 years ago
No comments:
Post a Comment